| Name > |
ttyreplay - realtime log file player |
| |
| Synopsis > |
ttyreplay [--no-pctrl] [-F|-f]
[-J time|-j packets] [-S
factor] [-T] [-m msec] [-t]
[-?|--help]
|
| |
| Description > |
ttyreplay is the tool to see -- to
replay -- what has been captured by (the Kernel module and)
rpld. Give it any number of files you want to see again. Options
apply to all files.
Without any arguments, ttyreplay will try to play
STDIN if it is not a tty. The special file "-" (so-called
lone dash) can be used to indicate STDIN, if STDIN is not the only
file to play.
|
| |
| Options > |
| --no-pctrl |
Disable play control. When play control is enabled,
you can pause replaying, skip forwards, raise/lower speed. See below
for more.
|
| -F |
Live feed follow mode. Seek to the end of the file
and tail-follow any new contents that are written to it. This does
the same as `tail -f` does with normal text logfiles. |
| -J time |
Skim to time position before starting to
play. |
| -S factor |
Plays the file back with a time warp of
factor. 1.0 is normal time, 2.0 is twice as
fast, 0.5 half speed, etc. |
| -T |
Shows (replays) the log without any delays. This can
be used to generate a screen log like script or
screen (rpl logfile without any packet headers, basically)
for easy grepping. |
| -f |
Catch-up follow mode. Plays the file back from the
start as usual and switches into -F mode when EOF is
reached. |
| -j count |
Skim count packets before starting to
play. |
| -m msec |
Set the maximum delay in milliseconds that will be
executed between packets. This check is done after the -S
option, so -m1000 -S2 will first crunch a delay request
(from the logfile) by factor 2, and then see if it is more than 1
second. |
| -t |
Shows the timestamp at the top right corner. Note
that this might not work with all terminals, because for one, not all
support it, and second, the escape code is currently hardcoded (no
terminfo use), so it might just break on the next terminal you
try.
-t will use "%H:%M:%S" as the
format, while -tt (or -t -t) uses "%d.%m
%H:%M".
|
|
| |
| Player
control > |
While ttyreplay is running, you can use the
following keys to interactively instruct ttyreplay to do
something:
| (spacebar) |
Toggle pause |
| < (less than) |
Move to the previous file. Note that this might not
work if the previous one was a pipe, STDIN or similar, because such
have been "read out". |
| > (greater than) |
Move to the next file |
| y or z |
Decrease playing speed by factor 1.33. (Playing
speeds would be { 0.42 0.56 0.75 1.00 1.33 1.77 2.35 3.12 4.16
5.53 }, relative to normal speed, for example.) |
| x |
Normal playing speed |
| c |
Increase playing speed by factor 1.33 |
| 6 |
Skip forward 10 seconds |
| 9 |
Skip forward 60 seconds |
| q or Ctrl+C |
Quit |
| e |
Toggle ECHO mode, i.e. show EVT_READ
packets (keypresses) as well, rather than just screen output. |
Skipping backwards is not implemented.
|
| |
| Example
files > |
There is an example file I provided (see
ttyrpld-examples.tbz2 on the webserver), you can watch it with
bzip2 -cd Commenting_ovcorr.bz2 | ttyreplay. It shows 1:1 (and
in full color!) how I commented the usleep_ovcorr() function.
It is advisable to run it with speed factor 3.0 (-S
option) and maximum delay 1 second (-m 1000), because in
real-time, it takes approximately 30 minutes thanks to the idleness of
the creator ;-)
|
| |
| See
also > |
rpl(5),
rpld(8) |
 |
|
